Microextraction of metal ions based on solidification of a floating drop: Basics and recent updates

This review provides a comprehensive evaluation of solidified floating organic drop microextraction (SFODME) procedures for metal ions preconcentration and their contributions to green chemistry. In this article we focused on the modifications that have been performed in the recent years to improve this environmentally friendly procedure. Among the most important of these modifications are the inclusion of ultrasonic energy, vortex and air agitation to enhance the dispersion process. The article also discussed new challenges in the procedure by using more ecofriendly solvents as extractants such as ionic liquids, deep eutectic. and supramolecular solvents. The coupling of SFODME with solid phase extraction increases selectivity and efficiency of the preconcentration procedure.     

Convergent Flows of Molten Polymers Modeled by Generalized Second-Grade Fluids of Power-Law Type

The molding processes of polymer melts involve geometrically complex dies. Such dies are usually tapered or streamlined to achieve a maximum output rate under conditions of laminar flow. The model of a generalized second-grade fluid of power-law type is used and the results obtained are illustrated by examples of convergent flows in conical and wedge-shaped dies.     

OADM环网的实验研究

研究了光分插复用器(OADM)的关键技术,重点分析了相关的实现技术,完成了利用OADM构建全光环网的实验研究,给出了重要的实验数据,包括眼图、光谱图、光信噪比、保护与恢复等,并对这些实验数据进行了分析,为光传送网的设计与构建提供了重要的参考依据.     

Modelling of a single drop impact onto liquid film using particle method

The process of single liquid drop impact on thin liquid surface is numerically simulated with moving particle semi‐implicit method. The mathematical model involves gravity, viscosity and surface tension. The model is validated by the simulation of the experimental cases. It is found that the dynamic processes after impact are sensitive to the liquid pool depth and the initial drop velocity. In the cases that the initial drop velocity is low, the drop will be merged with the liquid pool and no big splash is seen. If the initial drop velocity is high enough, the dynamic process depends on the liquid depth. If the liquid film is very thin, a bowl‐shaped thin crown is formed immediately after the impact. The total crown subsequently expands outward and breaks into many tiny droplets. When the thickness of the liquid film increases, the direction of the liquid crown becomes normal to the surface and the crown propagates outward. It is also found that the radius of the crown is described by a square function of time: r_C = [c(t ? t₀)]^0.5. When the liquid film is thick enough, a crown and a deep cavity inside it are formed shortly after the impact. The bottom of the cavity is initially oblate and then the base grows downward to form a sharp corner and subsequently the corner moves downward. Copyright © 2004 John Wiley & Sons, Ltd.     

利用有效液滴模型对超重元素α衰变半衰期的研究

利用有效液滴模型计算了偶偶超重核的α衰变半衰期,计算过程中采用了保持碎片体积守恒的不对称形状描述以及有效惯性系数计算Gamow势垒穿透因子.首先在质子数Z为88—98的区域检验了有效液滴模型,发现计算结果与实验符合得比较好.随后将此模型推广到Z≥100的情况,虽然只用了两个模型参数,计算结果与实验数据符合,说明有效液滴模型是计算偶偶超重核素α衰变半衰期的一个成功模型.     

歧管式微通道流动特性的研究

岐管式微通道(MMC)热沉具有热阻小、结构紧凑、冷却液流量小、流速低、沿流动方向温度分布均匀等优点.本文针对以去离子水为介质的岐管式微通道(宽W=100 μm,深H=300 μm)的流动特性进行了实验研究,实验的雷诺数范围为5O～3500.结果表明工质在微通道内流态由层流向紊流转变的临界雷诺数提前,此外数值模拟结果与实验值也吻合较好.最后在实验基础上,拟合出工质在层流和紊流下的流动阻力经验关联式.     

取压方式对微通道内单相摩擦阻力特性的影响

本文以去离子水和氮气为工质,在水平圆形微通道(dh=0．336 mm)中采用两种直接取压方式-缝隙取压和小孔取压,对单相摩擦阻力特性进行了实验研究,并通过改变缝隙宽度,研究缝隙宽度对压降测量偏差的影响．     

高剂量率单次快脉冲辐射参量测量

记述了“强光一号”高剂量率脉冲辐射装置在状态调试过程中对其出射波形和辐射剂量进行监测的基本情况，实际监测的结果与设计方监测的结果进行了比对，双方的剂量监测值基本一致，偏差在20％以内；双方的波形形状十分相似，但测量得到的波形半宽度却相差10～20ns，最后对双方束流监测产生的差异进行了定性分析。     

激光等离子实验中的低能X射线时间谱解谱方法

利用快速Fourier变换(FFT)算法和反卷积原理对Dante谱议测量波形进行了回推获得了激光等离子体源区低能X射线辐射时间波形。解谱方法采用了W.N.Mcelroy等人提出的SANDⅡ解谱方法并与文献[6]中介绍的限幅迭代和周期性光滑技术相配合计算出了能谱时间关系的16分区结果,给出了1989年6月LF-12强激光装置实验的双束靶、漏靶诊断口,入射口的X射线时间谱以及辐射温度时间关系T_R(i)。     

用超磁致伸缩调谐光纤光栅的光分/插复用器

提出并研究了一种新型多信道切换的全光分/插复用器,它主要由光纤Bragg光栅(FBG)和一对光环行器组成.采用了一种高效的超磁致伸缩材料(GMM)使FBG产生有效的Bragg波长偏移.用控制电流来调控FBG的应变和Bragg波长偏移.用4只相同的FBG与波长叠加技术相结合,可建立能提供15种不同下路信道方式的OADM.